Forward curved centrifugal Fan
Low Pressure Inclined Centrifugal Fan
MOQ：50-100
Product Details
The impeller edge of the forward curved centrifugal fan is parallel and the outlet angle of the impeller is more than 90 degrees. The single-phase centrifugal fan with forward tilting impeller uses a voltage of 220V and a frequency of 50hz. The forward curved centrifugal fan is in the majority of high pressure.
1.Introduction
Blade material: galvanized sheet
Warranty: 12 months
Net weight: 2.3 kg
Capacitor:3UF
Frequency: 50HZ
Specifications: 133mm
Uses: Ventilation of factories, mines, tunnels, ships and buildings, air conditioning, fresh air system, air purification and filtration equipment, aeration and propulsion of wind source and hovercraft in wind tunnel, pipe ventilation equipment, etc.
2. Technical parameters
| TYPE | VOLTAGE | FREQUENCY | CURRENT | INPUTPOWER | SPEED | CAPACITOR | NET WEIGHT | NOISE | MAX AIRFLOW |
| YWFF2E133-1 | 230V | 50HZ | 0.40A | 90W | 2680R/MIN | 3UF | 2.3KG | 53d(BA) | 185m³/h |
| YWFF2E133-2 | 230V | 50HZ | 0.45A | 95W | 2520R/MIN | 3UF | 2.3KG | 53d(BA) | 200m³/h |
3. Advantages
®Because of the low velocity of gas flow and little change of pressure, it is not necessary to consider the change of specific volume of gas, that is to say, the gas is treated as incompressible flow.
®The wheel-diameter ratio is large, and the number of blades is large.
®The relative width is large and the pressure coefficient is high.
®Low Noise, wide range of uses
®Maintenance-free, high efficiency and energy saving
®Can be customized according to customer requirements
4. Product packaging style
5. Payment terms ,Delivery and Service
6. FAQ
Q1:What is the production cycle of your company?
A:If there is any available, we can arrange the shipment immediately. If there is no stock, we need to arrange the production time according to the products you ordered.
Q2:How long does it take to ship the product?
A:If you send it by express or air, it will take about a week. If it is by sea, it may take a month.
Q3:What is the minimum order quantity for this product?
A:Our minimum order quantity is one. But it needs to bear the relevant freight.
Q4:What are the payment methods of your company?
A:Our company can use payment by telegraphic transfer and letter of credit at sight.
7.After-sale Service
Hot Tags: low pressure inclined centrifugal fan, China, manufacturers, suppliers, factory, customized, buy, Four Poles Forward Curved Centrifugal Fan, EC Cooling Axial Fan, Four Poles Internal Rotor Motor Axial Fan, Three Phases External Rotor Motor Axial Fan, 220V Forward Curved Centrifugal Fan, Six Poles Backward Curved Centrifugal Fan
You Might Also Like
